Expert Sewer Jetter Solutions. 10% Off for a Limited Time. Learn More.

Contact Us (800) 747-2312

Sewer Equipment Co.

Building a cleaner, safer future for underground infrastructure for over 80 years. Sewer Equipment Company manufactures a complete lineup of combination sewer cleaners, truck and trailer jetters, hydro excavators, industrial vacuum trucks, and air excavators under three specialized brands: Sewer Equipment Co. of America, RAMVAC, and Mongoose Jetters. Available with local sales, service, and support from Brown Equipment Company.

Combination Sewer Cleaners

When sewer mains back up during a storm, your crew needs equipment that starts fast and runs reliably without complicated computer diagnostics slowing them down. Sewer Equipment’s combination cleaners pair high-powered jetting with industrial vacuum in a single truck—powered by the patented Hydro Drive system that operates at 35% lower RPM than competitors.

370+ HP Sewer Equipment Model 900 ECO combination sewer cleaner with patented Hydro Drive powertrain

Model 900 Series

Full-size combination sewer cleaner with the patented Hydro Drive powertrain. No auxiliary engine needed—powers pump, blower, and hydraulics from the chassis engine at 35% lower RPM. Simple 1-2-3-4 switch operation with 12-volt controls.

Standard combination sewer cleaner with Hydro Drive powertrain

Min. HP370 HP
Debris Tank6 – 15 yd
Water800 – 2,100 gal
Vacuum4,400 CFM

Continuous boom variant with Hydro Drive powertrain

Min. HP370 HP
Debris Tank6 – 15 yd
Water800 – 2,100 gal
Vacuum4,400 CFM

Model Comparison

  • 900 ECO: Standard combination sewer cleaner with Hydro Drive
  • 900-CB ECO: Continuous boom variant with Hydro Drive

900 ECO Specifications

  • Patented Hydro Drive powertrain — no auxiliary engine, truck stays in neutral
  • Simple 1-2-3-4 switch operation with 12-volt controls (no CAN Bus)
  • Hydraulic boom: 180° working radius, 10’ extendable with heavy-duty 70° steel elbow
  • Front-mounted telescoping and rotating hose reel with auto level wind
  • 8″ vacuum system with single 8″ entry to dual 10″ exit points
  • Wireless remote control pendant with 35’ cord (standard)

900-CB ECO Specifications

  • Continuous boom design for enhanced reach and maneuverability
  • Patented Hydro Drive powertrain — no auxiliary engine, truck stays in neutral
  • Simple 1-2-3-4 switch operation with 12-volt controls (no CAN Bus)
  • Front-mounted telescoping and rotating hose reel with auto level wind
  • 8″ vacuum system | Wireless remote control pendant (standard)
  • Available in 6, 9, 12, or 15 yard configurations

Configurations (Both Models)

  • 6 Yard: 33’7″ L | 800 gal water | Single Axle
  • 9 Yard: 35’5″ L | 1,400 gal water | Single Axle
  • 12 Yard: 38’7″ L | 1,750 gal water | Tandem Axle
  • 15 Yard: 41’7″ L | 2,100 gal water | Tridem or Tandem w/ Pusher

Water Pump Options

  • 65 GPM @ 2,000 PSI (standard) | 80 GPM @ 2,000/2,500/3,000 PSI
  • 100 GPM @ 2,500 PSI | 120 GPM @ 2,000 PSI
  • All pumps: triplex plunger with 30-minute run-dry capability

Vacuum System

  • 4,400 CFM blower standard (5,400 CFM optional)
  • 8″ vacuum hose | 18″ Hg | Dual cyclone separators | Dual 10-micron final filters

Shared Features

  • Exclusive Duraprolene water tank — 100% corrosion immune, fully baffled
  • 3-stage air filtration: deflector plate, dual cyclone separators, dual final filters
  • NEMA 4 control panel | Military spec sealed switches
  • Hydraulic dump: 50° angle | Hydraulic open/close/lock rear door
Spec Sheet
No CDL Sewer Equipment Model 400 ECO mini combination sewer cleaner, no CDL required, all stainless steel construction

Model 400 ECO

The only mini combination sewer cleaner of its kind—no CDL required. All stainless steel construction. Fits in standard parking structures. Combined jetting and vacuum in one compact truck.

GVWR19,500 lbs
Debris Tank4 yd (Stainless)
WaterUp to 600 gal
Pump18 GPM @ 4,000 PSI

Specifications

  • Vacuum: Hibon positive displacement blower @ 28″ Hg | 4″ system
  • All stainless steel: debris tank, water tank, hose reel, full shroud
  • UDOR 18 GPM @ 4,000 PSI water pump
  • 1/2″ hose @ 400’ capacity
  • No CDL required — 19,500 lb GVWR
  • Fits standard parking structures
Spec Sheet

Truck Jets

Grease buildup, root intrusion, and debris blockages don’t wait for convenient weather. Sewer Equipment truck jets deliver the flow and pressure to keep lines clear year-round, with climate-controlled compartments and Duraprolene tanks that resist corrosion long after steel tanks fail.

PTO Drive Sewer Equipment Model 800-H ECO Series IV truck jetter with fixed rear hose reel and hydrostatic drive

Model 800 ECO Series IV

The gold standard truck jet. Climate-controlled shrouded compartment with 80,000 BTU heater. Exclusive Duraprolene water tanks. NEMA 4 watertight control panel.

Rear-mounted fixed hose reel with hydrostatic drive

Length22’6″
ReelFixed Rear
DriveHydrostatic
Water1,500 – 3,000 gal

Front-mounted hose reel with hydrostatic drive

Length28’8″
ReelFront-Mounted
DriveHydrostatic
Water1,500 – 3,000 gal

Most popular — rear rotating dual reel, retractable canopy, hot water capable

Length26’6″
ReelRotating Dual Rear
Hot WaterBoiler Available
Water1,500 – 3,000 gal

Rotating dual reel with integrated Cues CCTV for simultaneous jetting and inspection

Length26’6″
ReelRotating Dual Rear
CCTVCues Jet Pod
Water1,500 – 3,000 gal

Model Comparison

  • 800-H: 22’6″ L | Fixed rear reel | Hydrostatic drive
  • 800-HF: 28’8″ L | Front-mounted reel | Hydrostatic drive
  • 800-HPR: 26’6″ L | Rotating dual rear reel | Retractable canopy | Hot water boiler
  • 800-HPRTV: 26’6″ L | Rotating dual rear reel | Cues CCTV Jet Pod system

800-H Specifications

  • 22’6″ L | 8’4″ W | 11’1″ H
  • Rear-mounted fixed hose reel
  • PTO hydrostatic drive — lower RPM, less fuel, less noise
  • 1,500 gal Duraprolene water tank standard (up to 3,000 gal)
  • Painted steel or aluminum shroud with 3 roll-up doors
  • 80,000 BTU climate-controlled compartment

800-HF Specifications

  • 28’8″ L | 8’4″ W | 11’1″ H (nearly 6’ longer than rear-reel models)
  • Front-mounted hose reel — operator faces forward during payout
  • PTO hydrostatic drive — lower RPM, less fuel, less noise
  • 1,500 gal Duraprolene water tank standard (up to 3,000 gal)
  • Painted steel or aluminum shroud with 3 roll-up doors
  • 80,000 BTU climate-controlled compartment

800-HPR Specifications

  • 26’6″ L | 8’4″ W | 11’1″ H
  • Patented 190° rotating, extending/retracting dual hose reel
  • Retractable canopy | Operator station between hose reels
  • Hot water boiler: 12 GPM / 420,000 BTU or 20 GPM / 800,000 BTU
  • Wintertime recirculation system for highway speeds
  • Dual reel: 600’–1″ & 600’–3/4″ or 1,000’–1″ & 1,000’–3/4″

800-HPRTV Specifications

  • 26’6″ L | 8’4″ W | 11’1″ H
  • Integrated Cues Camera Jet Pod CCTV system
  • Umbilical cord technology — high-pressure hose + video cable in one
  • Simultaneous sewer cleaning and CCTV inspection
  • Self-leveling color TV camera | Color monitor | DVR w/ removable USB
  • 500’ umbilical hose & 700’–1″ TV reel configuration

Shared Specifications

  • Water: 1,500 – 3,000 gal Duraprolene (corrosion immune, fully baffled)
  • Pump: Giant 65 GPM @ 2,000 PSI (std) | 80 GPM @ 2,500 PSI | 55 GPM @ 3,000 PSI
  • Hose: up to 1,000’ capacity, 1/2″ – 1″
  • 80,000 BTU compartment heater | NEMA 4 watertight controls
  • Industrial bearing rated at 5,000 lbs supporting hose reel
  • Color-coded wiring with serial-number-specific diagrams
  • Single or Tandem Axle
Spec Sheet
Gas / Diesel Sewer Equipment Model 747-TK truck jetter with single rotating hose reel

Model 747 Truck Jet

Versatile truck-mounted jetter with gas or diesel engine options. Giant triplex plunger run-dry pump standard. Auxiliary engine or PTO hydrostatic drive.

Standard truck jetter with single rotating hose reel

Length26’2″
Height8’6″
ReelSingle Rotating
Water700 gal

Dual rotating reel with integrated Cues CCTV for simultaneous jetting and inspection

Length26’8″
Height8’6″
ReelDual Rotating
CCTVCues Jet Pod

Model Comparison

  • 747-TK: 26’2″ L | 8’6″ H | Single rotating reel | 700 gal water
  • 747-TK TV: 26’8″ L | 8’6″ H | Dual rotating reel | 1,500 gal water | 500’ umbilical + 600’ 3/4″ hose | Cues CCTV

747-TK Specifications

  • 26’2″ L | 8’6″ H | 700 gal water capacity
  • Ford gas engine or 74 HP Kohler diesel with heavy-duty cooling
  • Giant triplex plunger run-dry pump — 40 GPM @ 2,000 PSI or 35 GPM @ 3,000 PSI
  • Single rotating hose reel | Auxiliary engine or PTO hydrostatic drive
  • NEMA 4 watertight control panel | Up to 1,000’ hose capacity

747-TK TV Specifications

  • 26’8″ L | 8’6″ H | 1,500 gal water | Dual rotating hose reel
  • Integrated Cues Camera Jet Pod CCTV system for simultaneous jetting & inspection
  • 500’ umbilical cord + 600’ 3/4″ hose
  • Giant triplex plunger run-dry pump — 40 GPM @ 2,000 PSI or 35 GPM @ 3,000 PSI
  • NEMA 4 watertight control panel | Auxiliary engine or PTO drive

Shared Specifications

  • Width: 8’4″ | Single or Tandem Axle
  • Engine: Ford gas (standard) or 74 HP Kohler diesel w/ HD cooling
  • Pump: Giant triplex plunger run-dry | 40 GPM @ 2,000 PSI or 35 GPM @ 3,000 PSI
  • Max hose: 1,000’ | 1/2″ – 1″ hose sizes
  • NEMA 4 watertight control panel
Spec Sheet

Trailer Jets

Not every job needs a full-size truck—but it still needs full-size jetting power. Sewer Equipment trailer jets deliver the same heavy-duty pumps and construction in a towable, NATM-certified package that goes where trucks can’t, from rural easements to tight residential streets.

56 HP Diesel Sewer Equipment Model 545 budget-friendly trailer jetter with same jetting capability as 747 series

Model 545 Trailer Jet

Budget-conscious option with the same heavy-duty jetting construction as the 747 series. Available without enclosure or with engine enclosure only. Proven jetting performance at a lower entry point.

Length19’6″
Engine56 HP Kohler Diesel
Water700 gal
HoseUp to 1,000’

Specifications

  • 19’6″ L | 7’6″ W | 7’6″ H | Single or Tandem Axle
  • 56 HP Kohler diesel engine (standard)
  • Giant triplex plunger run-dry pump
  • 700 gal SuperPoly water tank (Duraprolene optional)
  • 1,000’ max hose capacity, 1/2″ – 1″ sizes
  • Open frame or engine enclosure only option
  • NATM certified | Fully welded 3/16″ x 2″ x 6″ steel frame
  • Towable with water | NEMA 4 watertight control panel
Spec Sheet
74 HP Diesel Sewer Equipment Model 747-FR2000 ECO fully enclosed trailer jetter with rotating hose reel

Model 747-FR2000 ECO

Industry standard since 1993. Fully enclosed premium trailer jetter with 74 HP Kohler diesel, rotating hose reel, and Duraprolene water tank option. NATM certified.

Length19’6″
Engine74 HP Kohler Diesel
Water700 gal
HoseUp to 1,000’

Specifications

  • 19’6″ L | 7’6″ W | 7’6″ H | Tandem Axle
  • 74 HP Kohler diesel with heavy-duty cooling
  • Giant triplex plunger run-dry pump | 40 GPM @ 2,000 PSI or 35 GPM @ 3,000 PSI
  • 700 gal SuperPoly water tank (Duraprolene optional)
  • Fully enclosed with rotating hose reel and auto level wind
  • NATM certified | Fully welded 3/16″ x 2″ x 6″ steel frame
  • Towable with water | NEMA 4 watertight control panel
  • Wireless pendant with hose payout/retrieve available
Spec Sheet
CCTV Sewer Equipment Model 747-FR2000TV ECO trailer jetter with integrated Cues CCTV inspection system

Model 747-FR2000TV ECO

Premium trailer jetter with integrated Cues Camera Jet Pod CCTV system. Dual rotating hose reel for simultaneous jetting and televising operations. 600’ umbilical + 1,000’ of 3/4″ hose.

Length22’
Engine74 HP Kohler Diesel
CCTVCues Jet Pod
ReelDual Rotating

Specifications

  • 22’ L | 7’6″ W | 8’ H | Single or Tandem Axle
  • 74 HP Kohler diesel with heavy-duty cooling
  • Giant triplex plunger run-dry pump
  • 700 gal SuperPoly water tank (Duraprolene optional)
  • Dual rotating hose reel: 600’ umbilical + 1,000’ of 3/4″ hose
  • Integrated Cues Camera Jet Pod CCTV system
  • NATM certified | Fully welded 3/16″ x 2″ x 6″ steel frame
  • Towable with water | NEMA 4 watertight control panel
Spec Sheet

Easement Machines

When sewer lines run behind fences, across creeks, down hills, and through gates too narrow for a truck, you need a machine that goes to the problem. The JAJ-600 Series fits through 36-inch gates and traverses terrain that stops conventional equipment—extending your jetting reach by 500+ feet.

24 HP Sewer Equipment JAJ-600WH Work Horse easement machine with hydraulically adjustable tracks for remote sewer access

JAJ-600WH Work Horse

Self-propelled tracked easement machine with hydrostatic tread drive, skid steering, and dual joystick controls. Fits through standard 36″ gates. Traverses logs, rocks, creeks, hills, stairs, sand, mud, and snow.

Dimensions7’2″ L | 2’10″ W
Engine24 HP Honda V-Twin
Track Width34″ – 46″
Ground Pressure< 4 PSI

Specifications

  • 7’2″ L | 2’10″ W | 5’5″ H
  • 24 HP Honda V-Twin engine
  • Hydrostatic tread drive (no chains or sprockets)
  • Hydraulically adjustable track width: 34″ to 46″
  • Ground pressure: 3.4 PSI per square inch
  • Max hose: 1″ x 600’ | 180° rotating safety reel
  • Hydraulic requirement: 10 GPM @ 2,000 PSI
  • 5 GPM / 10 GPM hydraulic tool circuit for bypass pumps and saws
  • Optional: auto level wind, digital SMART COUNTER, safety lights, tandem transport trailer
Skid Steer Sewer Equipment JAJ-600SK skid-mount easement machine with universal SAE-J2S13 mounting

JAJ-600SK Skid Mount

Mounts on any existing skid steer tractor with universal SAE-J2S13 mounting. Same 600-foot jetting reach and 180° rotating safety reel as the Work Horse, powered by your existing equipment.

Dimensions5’6″ L | 4’3″ W
MountSAE-J2S13
PowerHost Skid Steer
Hose1″ x 600’

Specifications

  • 5’6″ L | 4’3″ W | 4’4″ H
  • Universal SAE-J2S13 skid steer mount
  • Hydraulic requirement: 10 GPM @ 2,000 PSI
  • Max hose: 1″ x 600’ | 180° rotating safety reel
  • Safety pressure relief valve | Variable speed control
  • Optional: auto level wind, digital SMART COUNTER, safety lights
Electric Sewer Equipment JAJ-E electric easement machine with less than 65 dB noise for residential neighborhoods

JAJ-E Electric

Zero-emission electric easement machine operating at less than 65 dB—quiet enough for residential neighborhoods, hospitals, and schools. Full work day battery life with overnight charging.

Dimensions9’6″ L | 2’10″ W
PowerElectric (Battery)
Noise< 65 dB
RuntimeFull Work Day

Specifications

  • 9’6″ L | 2’10″ W | 5’6″ H
  • Fully electric — zero emissions
  • Noise level: less than 65 dB
  • Battery charge time: 12 hours (overnight)
  • Ground pressure: less than 4 PSI
  • Max hose: 1″ x 600’ | 180° rotating safety reel
  • Ideal for residential, hospital, and school zones

Hydro Excavators

Blind digging around buried utilities risks costly damage, service outages, and safety incidents. RAMVAC hydro excavators use pressurized water and industrial vacuum to safely expose underground infrastructure—with temperature-controlled compartments that keep crews working through winter.

Mid-Size RAMVAC HX-3 mid-size hydro excavator with 3 cubic yard debris capacity for utility potholing

RAMVAC HX Mid-Size Series

The industry’s first mid-size hydro excavation trucks. Purpose-built for utility potholing and congested urban environments where full-size trucks can’t operate.

3 cubic yard compact hydro excavator for tight urban potholing

Debris3 yd
Water325 gal
Boom11’ – 16’
Length27’

6 cubic yard mid-size — right-sized for utility locating and slot trenching

Debris6 yd
Water650 gal
Boom13’ – 18’
Length30’

Model Comparison

  • HX-3: 27’ L | 3 yd | 325 gal | 11–16’ boom | 33,000 lb GVWR
  • HX-6: 30’ L | 6 yd | 650 gal | 13–18’ boom | 39,000 lb GVWR

HX-3 Specifications

  • 27’ L | 8’ W | 12’ H | 23,800 lbs empty | 33,000 lb GVWR
  • 3 yd debris tank | 325 gal water | 300 HP minimum
  • 11–16’ boom | 6″ vacuum system, 3,000 CFM
  • Single or Tandem Axle configuration
  • Temperature-controlled environmental chamber (80,000 BTU)

HX-6 Specifications

  • 30’ L | 8’ W | 12’ H | 27,040 lbs empty | 39,000 lb GVWR
  • 6 yd debris tank | 650 gal water | 300 HP minimum
  • 13–18’ Dig Deep boom | 6″ vacuum system, 3,000 CFM
  • Single or Tandem Axle configuration
  • Temperature-controlled environmental chamber (80,000 BTU)

Shared Specifications

  • Width: 8’ | Height: 12’ | Min HP: 300 | Single or Tandem Axle
  • Vacuum: 6″ system, 3,000 CFM, 8″ blower
  • Water pump: 10 GPM @ 3,000 PSI | Heater: 400,000 BTU
  • 320° boom working radius | Dig Deep boom
  • Temperature-controlled environmental chamber (80,000 BTU)
  • Cyclone separation | 10-micron final filter | NEMA 4 electrical
  • Heated hand wash system | 75’ retractable hose reel (standard)
Spec Sheet
Full-Size RAMVAC HX-9 full-size hydro excavator with 9 cubic yard debris capacity and 20-foot boom reach

RAMVAC HX Full-Size Series

Full-size hydro excavators for large-scale utility excavation, pipeline work, and municipal infrastructure. Temperature-controlled environmental chambers. Independent drive systems. Fully hydraulic powertrains.

9 cubic yard full-size with up to 20-foot boom reach

Debris9 yd
GVWR66,000 lbs
Boom15’ – 20’
AxleTandem / Pusher / Tri

12 cubic yard with up to 23-foot boom reach

Debris12 yd
GVWR79,200 lbs
Boom18’ – 23’
Length38’

Quint Axle — 5-axle configuration with the largest legal payload in the industry

Debris12 yd
GVWR99,500 lbs
Payload27,000+ lbs
Length35’

Largest in series — 36″ shorter and 2,500 lbs more payload than competitors

Debris15 yd
GVWR88,000 lbs
Boom21’ – 26’
Length40’

Model Comparison

  • HX-9: 9 yd | 66,000 lb GVWR | 15–20’ boom | Tandem/Pusher/Tri Axle
  • HX-12: 12 yd | 79,200 lb GVWR | 18–23’ boom | 38’ L | Tandem/Pusher/Tri
  • HX-12 Quint: 12 yd | 99,500 lb GVWR | 18–23’ boom | 35’ L | 5 axles | 27,000+ lb payload
  • HX-15: 15 yd | 88,000 lb GVWR | 21–26’ boom | 40’ L | Tri Axle

HX-9 Specifications

  • 35’ L | 13’1″ H | 38,300 lbs empty | 66,000 lb GVWR | 425 HP min
  • 9 yd debris tank | 1,300 gal water
  • 15–20’ boom | 8″ vacuum system, 4,400 CFM (5,400 optional)
  • Tandem, Pusher, or Tri Axle configuration

HX-12 Specifications

  • 38’ L | 13’1″ H | 43,030 lbs empty | 79,200 lb GVWR | 425 HP min
  • 12 yd debris tank | 1,300 gal water
  • 18–23’ boom with telescoping option | 8″ vacuum, 4,400 CFM (5,400 optional)
  • Tandem, Pusher, or Tri Axle configuration

HX-12 Quint Specifications

  • 35’ L | 99,500 lb GVWR | 12 yd debris | 18–23’ boom
  • 5 axles: tandem + 2 pushers + tag — over 27,000 lbs payload
  • Largest legal payload in the industry
  • 2’ shorter than standard HX-12 for improved maneuverability

HX-15 Specifications

  • 40’ L | 8’6″ W | 13’1″ H | 46,500 lbs empty | 88,000 lb GVWR | 425 HP min
  • 15 yd debris tank | 1,300 gal water | Tri Axle
  • 21’ boom with 5’ extension (26’ total reach)
  • 36″ shorter and 2,500 lbs more payload than competitors

Shared Specifications

  • Min HP: 425 | Height: 13’1″ | Water: 1,300 gal
  • Vacuum: 8″ system, 4,400 CFM, 18″ Hg (5,400 CFM / 28″ Hg optional)
  • Water pump: 10 GPM @ 3,000 PSI (18 GPM @ 3,000 PSI optional)
  • Water heater: 400,000 BTU (800,000 BTU optional)
  • Dig Deep boom | 320° working radius | Temperature-controlled chamber
  • Cyclone separation | Vacuum enhancer | Directional discharge
  • Independent drive systems | Hydrostatic blower drives | NEMA 4 electrical
Spec Sheet

Industrial Vacuum & Air Excavators

From industrial cleanups to utility potholing, some jobs need raw vacuum power or the precision of air excavation. RAMVAC’s TEMPEST and AX series deliver specialized vacuum solutions—from 18-yard industrial loads to CDL-free air excavation units.

18 yd RAMVAC TEMPEST industrial vacuum loader with 18 cubic yard debris box and articulating knuckle boom

RAMVAC TEMPEST

“The Perfect Storm.” State-of-the-art industrial vacuum for removing dry, dusty materials and liquids over long distances. Exclusive articulating knuckle boom with 270-degree range. Self-discharging automatic filter system.

Debris Box18 yd (Carbon Steel)
Vacuum5,500 CFM / 28″ Hg
Boom16’ / 270°
Min. HP450 HP

Dimensions & Weight

  • 38’3″ L | 8’3″ W | 13’5″ H | 46,900 lbs empty | 79,200 lb GVWR
  • Tandem / Pusher / Tridem axle | Drop axle: +8,500 lbs capacity

Key Features

  • Exclusive articulating knuckle boom: 4.5’ extension, 16’ total, 270°
  • 28″ Hg, 5,500 CFM positive displacement blower, 8″ system
  • Self-discharging automatic interval cleaning baghouse filter
  • Full opening rear door — one dump to empty | 50° dump angle
  • Trident Wireless Remote (standard) | E-stops in multiple locations
  • Optional: hydro excavation package, body vibrator, boom catwalk
Air + Water RAMVAC AX air excavator on Class 6 chassis, no CDL required, for non-destructive utility potholing

RAMVAC AX Air Excavator

Single-engine air and water excavation for non-destructive utility potholing. Simple 12-volt controls and manual hand valves. Dig Deep boom reaches 10 feet below grade.

Class 6 chassis — no CDL required

ChassisClass 6 (No CDL)
Debris2 – 3 yd
Air185 CFM @ 150 PSI
Vacuum1,400 CFM

Class 7 chassis with hydro excavation capability and expanded water capacity

ChassisClass 7
Debris2 – 4 yd
AirUp to 300 CFM @ 250 PSI
Water50 – 350 gal

Model Comparison

  • AX: Class 6 (No CDL) | 2–3 yd | 50 gal water | 185 CFM @ 150 PSI
  • AX-XL: Class 7 | 2–4 yd | 50–350 gal water | Up to 300 CFM @ 250 PSI | Hydro excavation capable

AX Specifications

  • Class 6 chassis — no CDL required | 5,000–12,000 lbs payload
  • 2–3 yd debris | 185 CFM @ 150 PSI air | 1,400 CFM @ 16″ Hg vacuum
  • 50 gal water | 4″ or 6″ hose
  • Dig Deep boom reaches 10’ below grade
  • Single-engine design with 12-volt controls

AX-XL Specifications

  • Class 7 chassis | 2–4 yd debris capacity
  • Up to 300 CFM @ 250 PSI air | Up to 3,000 CFM @ 27″ Hg vacuum
  • 50 gal water standard (300 gal upgrade available) | Hydro excavation capable
  • Dig Deep boom reaches 10’ below grade

Shared Features

  • Single-engine design | Dig Deep boom (10’ below grade)
  • Vacuum: 1,400–3,000 CFM | 4″ or 6″ hose | Wireless remote
  • Heated water system enclosure | Hydraulic rear door
  • 12-volt controls & manual hand valves | Ground-level maintenance
  • Eco-friendly: lower RPMs, less fuel, less noise

High-Performance Sewer Jetters

When your crew needs a dedicated jetter that’s built to run all day without babysitting, Mongoose delivers. Run-dry plunger pumps that survive 30 minutes without water, NEMA 4 watertight controls, and wireless remote operation—in trailer, truck, and van pack configurations.

12 GPM Mongoose Jetters Model 123-T trailer jetter at 12 GPM and 3000 PSI on single axle trailer

Mongoose Model 123

Compact, powerful jetter for drain cleaning and main lines up to 8 inches. 24 HP 690cc gas engine with plunger run-dry pump.

Towable single axle trailer — 3,500 lb rated, towable with water

Tank150 gal
Axle3,500 lb Single
Hose3/8″ x 250’
Pump12 GPM @ 3,000 PSI

Van-mounted with 50 extra gallons and wireless remote available

Tank200 gal
FormVan Pack
Hose3/8″ x 250’
Pump12 GPM @ 3,000 PSI

Model Comparison

  • 123-T: 150 gal | Single axle trailer (3,500 lbs) | Towable with water | 400’ hose optional
  • 123-V: 200 gal | Van/enclosed trailer mount | Wireless remote available

123-T Specifications

  • 150 gal tank | 3,500 lb rated single axle trailer — towable with water
  • 24 HP 690cc gas engine | 12 GPM @ 3,000 PSI plunger pump
  • 3/8″ x 250’ hose (400’ optional)
  • NEMA 4 control box

123-V Specifications

  • 200 gal tank | Van or enclosed trailer mount
  • 24 HP 690cc gas engine | 12 GPM @ 3,000 PSI plunger pump
  • Wireless remote available
  • 3/8″ x 250’ hose | NEMA 4 control box

Shared Specifications

  • Pump: 12 GPM @ 3,000 PSI plunger run-dry
  • Engine: 24 HP 690cc gas
  • NEMA 4 control box | Cleans lines up to 8″
Spec Sheet
18 GPM Mongoose Jetters Model 184-HD trailer jetter at 18 GPM and 4000 PSI with 300 gallon tank

Mongoose Model 184

Best-selling model in the Mongoose lineup. 5-cylinder plunger run-dry pump with 30-minute run-dry capability. Available in six configurations for main lines up to 12 inches.

Standard trailer jetter with rotating hose reel — 300 gallon, single axle

Tank300 gal
Axle7,000 lb Single
ReelRotating
RemoteOptional

Extended capacity — 600 gallon tank on dual axle for longer runs between refills

Tank600 gal
Axle9,900 lb Dual
ReelRotating
RemoteOptional

Mid-tier with pivot reel and wireless remote standard — full nozzle lineup included

Tank300 gal
Axle7,000 lb Single
ReelPivot
RemoteStandard

Most affordable 184 — fixed reel, lighter frame, proven jetting performance

Tank300 gal
Axle7,000 lb Single
ReelFixed
TypeBudget

Enclosed truck body — all-weather protection with optional hot water boiler

Tank300 – 600 gal
FormEnclosed Truck
BoilerOptional
ProtectionAll-Weather

Van pack — Sprinter van mounted for urban/commercial drain service

Tank300 gal
FormVan Pack (Sprinter)
BoilerOptional
RemoteOptional

Model Comparison

  • 184-HD: 300 gal | 7,000 lb single axle | Rotating reel | Standard trailer
  • 184XL-HD: 600 gal | 9,900 lb dual axle | Rotating reel | Extended capacity
  • 184-LT: 300 gal | 7,000 lb | Pivot reel | Wireless remote standard | Nozzle lineup
  • 184-ULT: 300 gal | 7,000 lb | Fixed reel | Most affordable option
  • 184-HD-ETK: 300–600 gal | Enclosed truck body | Hot water boiler optional
  • 184-HD-VR: 300 gal | Sprinter van pack | Hot water boiler optional

184-HD Specifications

  • 300 gal tank | 7,000 lb single axle trailer — towable with water
  • Rotating hose reel | 1/2″ x 600’ hose (1,000’ optional)
  • Wireless remote optional
  • NEMA 4 control box | 30-minute run-dry rated pump

184XL-HD Specifications

  • 600 gal tank | 9,900 lb dual axle trailer — towable with water
  • Double the water capacity of the HD for longer runs between refills
  • Rotating hose reel | 1/2″ x 600’ hose (1,000’ optional)
  • Wireless remote optional | NEMA 4 control box

184-LT Specifications

  • 300 gal tank | 7,000 lb single axle trailer
  • Pivot hose reel | Wireless remote STANDARD
  • Full cleaning nozzle lineup included
  • Optional mini hose reel kits | NEMA 4 control box

184-ULT Specifications

  • 300 gal tank | 7,000 lb single axle trailer
  • Fixed hose reel | Lighter frame design
  • Most affordable 184 option — proven jetting performance
  • 30-minute run-dry rated pump | NEMA 4 control box

184-HD-ETK Specifications

  • 300–600 gal water (configurable) | Enclosed truck body
  • All components weather-protected inside enclosed body
  • Hot water boiler optional | Wireless remote optional
  • Multiple chassis options available

184-HD-VR Specifications

  • 300 gal tank | Sprinter van or similar enclosed vehicle
  • All components enclosed — compact for urban/commercial drain service
  • Hot water boiler optional | Wireless remote optional
  • NEMA 4 control box | 30-minute run-dry rated pump

Shared Specifications

  • Pump: 18 GPM @ 4,000 PSI | 5-cylinder plunger run-dry (30 min)
  • Engine: Min. 49 HP Tier IV turbo diesel
  • Hose: 1/2″ x 600’ (1,000’ and dual reel options)
  • NEMA 4 control box | Cleans lines up to 12″
  • Tubular steel frame with corrosion-resistant sub-assemblies
Spec Sheet
25 GPM Mongoose Jetters Model 254-HD heavy-duty trailer jetter at 25 GPM and 4000 PSI with 300 gallon tank

Mongoose Model 254

The heavy hitter. 25 GPM at 4,000 PSI with a 3-cylinder plunger run-dry pump for main lines up to 24 inches.

Standard trailer — 300 gallon, single axle

Tank300 gal
Axle7,000 lb Single
Hose5/8″ x 500’
Pump25 GPM @ 4,000 PSI

Extended capacity — 600 gallon tank on dual axle

Tank600 gal
Axle9,900 lb Dual
Hose5/8″ x 500’
Pump25 GPM @ 4,000 PSI

Enclosed truck body with optional PTO drive

Tank300 – 600 gal
FormEnclosed Truck
Hose5/8″ x 500–600’
PTO DriveOptional

Model Comparison

  • 254-HD: 300 gal | 7,000 lb single axle | Standard trailer
  • 254XL-HD: 600 gal | 9,900 lb dual axle | Extended capacity
  • 254-HD-ETK: 300–600 gal | Enclosed truck body | PTO drive optional

254-HD Specifications

  • 300 gal tank | 7,000 lb single axle trailer — towable with water
  • 5/8″ x 500’ hose | 25 GPM @ 4,000 PSI
  • 74 HP Tier IV turbo diesel engine
  • NEMA 4 control box | Wireless remote & hot water boiler available

254XL-HD Specifications

  • 600 gal tank | 9,900 lb dual axle trailer
  • Double the water capacity of the 254-HD
  • 5/8″ x 500’ hose | 25 GPM @ 4,000 PSI
  • 74 HP Tier IV turbo diesel | NEMA 4 control box

254-HD-ETK Specifications

  • 300–600 gal water (configurable) | Enclosed truck body
  • 5/8″ x 500–600’ hose | 25 GPM @ 4,000 PSI
  • PTO drive optional | Multiple chassis options
  • All components weather-protected | NEMA 4 control box

Shared Specifications

  • Pump: 25 GPM @ 4,000 PSI | 3-cylinder plunger run-dry
  • Engine: Min. 74 HP Tier IV turbo diesel
  • NEMA 4 control box | Wireless remote & hot water boiler available
  • Cleans main lines up to 24″
Spec Sheet

Best Products. Best Local Support.

Sewer Equipment has been building the most reliable underground infrastructure equipment in America for over 80 years—and Brown Equipment is here to make sure you get the right machine, the training to run it, and the service to keep it running.

80+ Years of Innovation

Since 1941, Sewer Equipment has engineered and manufactured sewer maintenance equipment in the U.S. Eight decades focused on one mission: building the simplest, most reliable equipment in the industry.

24/7 Technical Support

When equipment goes down during an emergency, Sewer Equipment’s 24/7 tech support line connects you with technical support specialists. No voicemail trees, no waiting until Monday.

Complete Product Range

From combination sewer cleaners and truck jets to hydro excavators, industrial vacuums, and portable jetters—one manufacturer covers your entire underground infrastructure fleet.

Local Support from Brown Equipment

Brown Equipment provides hands-on demos, operator training, and regional parts and service support. Test equipment in real field conditions before you buy.

Frequently Asked Questions

Common questions about Sewer Equipment products and purchasing from Brown Equipment Company.

A combination sewer cleaner combines high-pressure water jetting and vacuum capability in one truck—it jets debris loose and vacuums it out of the line in a single operation. A truck jetter provides high-pressure water only, pushing debris downstream to a collection point. Combination units (like the Sewer Equipment Model 900 ECO) are ideal when debris must be removed from the line entirely, while truck jets (like the Model 800 Series IV) carry larger water tanks—up to 3,000 gallons—and are best suited for routine cleaning where material can flow to a downstream manhole. The right choice depends on whether your operations require vacuum removal or can rely on gravity flow.
Trailer jetters are towable, require no dedicated truck chassis, and can access tight residential streets, rural easements, and job sites where a full-size truck can’t reach. They’re generally more budget-friendly and don’t tie up a CDL driver. Truck-mounted jetters carry significantly more water (up to 3,000 gallons vs. 700 on most trailers), offer climate-controlled compartments for cold-weather operation, and are better suited for continuous, high-volume municipal work. Sewer Equipment offers both: the Model 545 and 747 trailer series for towable flexibility, and the Model 800 Series IV and 747-TK truck jets for dedicated fleet operations. The decision typically comes down to water capacity needs, how often the unit will be deployed, and whether your crew has CDL-licensed operators available.
Hydro excavation uses pressurized water to loosen soil and an industrial vacuum to remove it, creating a precise excavation without the risk of damaging buried utilities. It should be used anytime you need to dig near gas lines, fiber optics, electrical conduits, water mains, or other underground infrastructure where a mechanical excavator could cause costly damage or safety hazards. Common applications include utility potholing (verifying the location of buried lines before construction), slot trenching, daylighting, and installing service connections. RAMVAC hydro excavators are available from 3 to 15 cubic yards of debris capacity, with heated water systems and temperature-controlled compartments for year-round operation in cold climates.
Hydro excavation uses pressurized water to break up soil, while air excavation uses compressed air. Both methods pair with industrial vacuum to remove loosened material. Air excavation is generally preferred around sensitive utilities—like fiber optic cables and direct-buried electrical—because compressed air is less likely to damage fragile infrastructure than pressurized water. Hydro excavation moves material faster and is more effective in compacted or clay-heavy soils. RAMVAC offers both: the HX Series for hydro excavation (3–15 cubic yard capacity) and the AX Series for air excavation, including a Class 6 model that requires no CDL. The AX-XL can also perform hydro excavation, giving crews both capabilities in a single unit.
The right size depends on your typical job scope, how far you travel between dump sites, and what your roads and job sites can accommodate. Mid-size units like the RAMVAC HX-3 (3 cubic yards) and HX-6 (6 cubic yards) are designed for utility potholing, congested urban environments, and jobs where a full-size truck is too large to maneuver. Full-size units like the HX-12 (12 cubic yards) and HX-15 (15 cubic yards) are built for large-scale pipeline work, extended excavation runs, and operations where minimizing dump trips matters. Consider your average debris volume per job, the distance to your dump site, any road weight or bridge restrictions in your service area, and whether you need longer boom reach for deeper or harder-to-access excavations. Contact Brown Equipment for help selecting the right configuration.
It depends on the equipment’s gross vehicle weight rating (GVWR). Several Sewer Equipment products are specifically designed to operate below CDL thresholds: the Model 400 ECO mini combination sewer cleaner (19,500 lb GVWR), the RAMVAC AX air excavator (Class 6 chassis), and Mongoose Jetters trailer models that are towed behind a standard pickup or service truck. Larger equipment—including full-size combination sewer cleaners, truck-mounted jetters, and full-size hydro excavators—typically exceeds 26,000 lbs GVWR and requires a CDL. Requirements also vary by state, so check your local regulations or contact Brown Equipment for guidance on specific models.
An easement machine is a compact, remote-access sewer jetting unit that extends the reach of your jetting truck or trailer by 500 feet or more into areas that vehicles can’t access. They’re used when sewer lines run behind fenced yards, across creeks, down steep hills, through narrow gates, or in other locations where driving a truck or trailer to the cleanout isn’t possible. Sewer Equipment’s JAJ-600 Series fits through standard 36-inch gates and can traverse rough terrain including mud, snow, stairs, and steep grades. Available as a self-propelled tracked unit (JAJ-600WH), a skid steer attachment (JAJ-600SK), or a battery-powered electric model (JAJ-E) for noise-sensitive residential areas.
Match your jetter’s flow rate (GPM) and pressure (PSI) to the pipe sizes you most commonly service. For drain lines and mains up to 8 inches, the Mongoose Model 123 at 12 GPM @ 3,000 PSI provides sufficient cleaning power in a compact trailer or van pack. For main lines up to 12 inches, the Mongoose Model 184 at 18 GPM @ 4,000 PSI is the most popular choice and is available in six configurations from budget trailers to enclosed trucks. For large-diameter mains up to 24 inches, the Mongoose Model 254 at 25 GPM @ 4,000 PSI delivers the flow needed to move heavy debris in bigger pipes. All Mongoose models use run-dry plunger pumps designed to survive accidental dry operation, and are available in trailer, truck, and van configurations to fit different fleet needs.
Yes. RAMVAC hydro excavators are built for year-round operation, including sub-freezing conditions. The HX Series features temperature-controlled environmental chambers that enclose the entire water system—pumps, plumbing, and tanks—inside a heated compartment. Standard features include water heaters (up to 400,000 BTU, with 800,000 BTU optional on full-size models), heated equipment lockers, water recirculation systems, and anti-freeze systems. These systems keep water flowing and prevent freeze-ups during winter operations, which is critical for utilities, municipalities, and contractors in northern climates who need to excavate year-round.
Brown Equipment Company provides hands-on demonstrations where our team brings the equipment to your location so your operators can evaluate it under real field conditions before making a purchase decision. We can help you select the right product and configuration for your specific applications, crew size, and budget. Sewer Equipment also offers operator and technician training through Sewer Equipment University, and their 24/7 technical support line (855-737-8247) is available for assistance after purchase. Contact us to schedule a demo or request a quote.
GET IN TOUCH

Unlock Your Sewer Equipment Equipment Potential

Ready to elevate your sewer management projects? Fill out the form below to connect with our team. Whether you want to schedule a demonstration or learn more about Sewer Equipment machines, we’re here to provide the perfect solutions. Let’s transform your operations together!

By submitting this form, you agree to our Privacy Policy.